And we trudge forward.

Well, the last couple of days were long and I'm sore all over. Adam had more shop business yesterday, so it was me and pups again...and as usual, they were no help at all. They spent most of the day basking in the sun and trading places on the bed.


Stinkers. Meanwhile, I was able to get started even earlier with the nice weather, but then I immediately lost my keys in this mess while I was tromping down the flowers.


I was a little afraid I'd be stuck sifting through lilies all day, but I found them without too much trouble.

Considering it was just me, I think I did ok. I was able to get all the brick rollered by about 2 or 3 in the afternoon; I started using the sprayer again to get into the mortar, but I was just chasing drips and not getting great coverage, so I went back to my trusting 3" Wooster and a trim cup. It'll be slow-going, but we'll get there eventually. The biggest hurdle has been crossed. I think. At least my arms will be a fully painted, lovely shade of gray before it's over.


All I know is that I don't think I could have worked on it one more day. I've never been so happy to go back to work in my life.

Next time around...

I keep thinking, "Next time I have to paint a brick house, I'm paying someone to do it."

And then I remember, that if I have one personality trait that trumps "lazy," it's "cheap."

True fact.

More than I bargained for

I'm tired. I hurt all over.

The pibs is pooped, too.

While I painted the house, Robin ran around after squirrels; River sat next to me and stared at the paint roller; Simon slept. We're all pretty worn out.

I took the day off of work to keep up the painting. Yesterday, Adam and I were rollering the brick, while the kiddo and our friend Jessica cam behind us with brushes to fill in the mortar and other spots we missed. I was using a regular roller with a 1 1/4" nap roller cover; Adam was using a Wagner Paint Mate Plus with a 3/4" nap. The Paint Mate Plus is one of the ones where you fill the handle with paint, and pull a trigger to pump the paint into the roller. This all worked pretty well with 4 sets of hands.

Today, it was just me. Adam had shop stuff to do, and the kiddo went back to her mom's and to school. Just me and the pups-- and let's be honest: their lack of opposable thumbs really worked against us.

I used the Wagner roller for a while, and things went fine. When my arm started to get tired, I switched to the brush. Filling in all the mortar...took foreeeeeeever. It went sooooo slooooow. By about 1:45, I'd finally had it. I looked down the wall, and it was just freakin' miles of mortar to paint.

Luckily, I remembered that Harbor Freight had a 20% off coupon in the paper yesterday, so off I went to buy a cheap, shitty paint sprayer. (I also got a free flashlight! Bonus!!)

I got it home and started playing with it. I have to thin the paint so much, and the container is so small, that I don't want to use it for the majority of the brick, but it was definitely a turning point in my productivity for the day. Here's what I do. I paint with the roller, and then use the sprayer to put a quick, thin coat onto the mortar. Lastly, I take the brush and backbrush the paint into the mortar and splotchy areas. It goes so, so, so much faster. So I'm taking off tomorrow to try and get the rest of the house body finished. I know the trim won't happen immediately, but we will be so very close.

So very, very close.

Long Time Coming

A VERY long time.

Life, as we all know, gets in the way of pretty much everything. We've been immersed in puppy dogs-- training and socializing and snuggling. I haven't had a chance to start the dog blog that I've been wanting to. Adam has been in the throes of buying, moving and reopening a liquor store for the last several months, so that's been sucking a lot of time away from the house.

We've been busy...just not busy on the house.

Well that all changed this weekend. We have a few days in a row of great weather, and we decided to just dive in and take advantage of it. I sprayed down the house yesterday, scraped a bit, and today we started the actual painting. There's no going back now.

As it was:

And at the end of the day (sorry for the camera-phone pic):

It looks impressively like our photoshopped idea.

So far so good.

The colors

Here's the column that we painted as it will be...


We'll see... ;-)

April Update

Wow. We've really been slacking.

It's been awfully hard to want to do much; the weather finally got nice, and while we should be taking advantage of it to do house work, I don't think anyone believes it's really here and just wants to take advantage of it to have fun while we can!

We did manage to finally decide on a paint color. We ended up going with the darker color on the right and the darker, browner red.

The green/taupe/khaki color for the brick; the cream color for wood trim; the red for the eaves and prob frint door; maybe also windows. Haven't totally decided on that.

I'll have to post a pic later of the column that we mocked up to make the final decision. We wanted to try to claim the last of the depreciation, so we had to go ahead and buy the paint, even though the weather isn't quite paint worthy yet.

We were going to use the Lowe's Valspar Duramax when we planned to paint during cold weather since it goes down to 35º. But now that it looks like we can wait until summer, we decided to go with regular Valspar Ultra Premium. It still gets great reviews from Consumer Reports, and we've certainly had good luck with it so far. And it's about $50 per 5gal bucket cheaper. Bonus.

So anyway, we went ahead to try and get it before our depreciation deadline and to take advantage of what we thought was a rebate offer; it was actually only for indoor paint. But no matter-- we got a great deal anyway...

See, when we got there, the paint dude told us he was out of the stuff he needed to do 5gal buckets of one of our colors in the ultra premium and that he could do Duramax for $50 more. Well, we discussed it, and decided to just get single gallons instead; we really didn't need the Duramax. While we were shopping for other stuff, the paint guy found us and told us he'd given the paint to us for the same price as 5gals. Awesome!

We go to pick up our paint and...uh oh. There's been a misunderstanding. He thought we wanted single gallons of Duramax (which kind of defeats the purpose, but we did get fewer gallons, 8 instead of 10, and I think he must have thought we were saving money by getting less...I dunno.). They are all labeled at $29 each, which is the 5gal price, but still more than we wanted to pay. We tell him there's been a misunderstanding and without blinking, the guy says, "Oh. Ok, No problem. I'll just give it to you for the cheaper price."

And not only does he give it to us for the price of Ultra Premium, he gives us the Ultra Premium 5gal price-- $17.90 per gallon. Holy CRAP.

Did we get a wicked deal or what?!? We kept apologizing to the guy, but at that point, his alternative was to put it on the mistint table for $5, so I guess this was better all the way round.

I hope we can get to this in the next few weeks. Honestly, all my time is being sucked up by animals; the new puppy is quite a handful. I'm actually thinking about starting another blog to track her training progress. We found her wandering around our neighborhood for several days and finally took her in as the sleet started coming down, the beginning of a mega snow storm. We looked for an owner, checked for a microchip, left a description and our phone number with the Humane society. Nothing. She was underweight and had worms. She's finally settling in, but we have a long way to go with her...


She is scared of everything. She barks at people and things that are unfamiliar, and cowers and gets stock still if she's scared and thinks someone's going to handle her (the vet). She was spayed and then had a bad reaction at the suture site, so the increased vet visits and handling didn't help matters. She also doesn't really know how to share her things with us-- she gaurds her toys and balls and bones (in fact NO MORE BONES for a while-- yikes!). Thing is, I already have a fear aggressive dog, and do not want another one! So most of my time is spent with her at the park, clicker and treats in hand, teaching her to be calm around unfamiliar stuff, or playing games of trade with her toys. She's super smart and sweet, and warms up to new people pretty quickly (treats help!), so I'm optimistic.

And that's the news around here! If I do start another blog, I'll post a link to it here, for any of you dog enthusiasts. It's sort of taken over my life-- I'm reading animal behavior books and scouring training forums and researching holistic remedies for any and all problems. I never thought it would be so fascinating to me, but there you have it!

I'm grateful...

Grateful for the great weather.

Mother Nature finally gave us a weekend worth spending outside. I spent Saturday doing some dog training outside the house and picked up a bunch of paint samples from Lowe's. Today, we chose a few and here's the result:


Of course, the colors don't translate, so it's a little pointless for me to post these pics.

The red on the left is an old color sample. The middle color is somewhat more taupe-- warmer-- than it looks in the picture. The white is perhaps not quite right, but I do like the red:



The color on the right is actually greener than it looks, and I'm not crazy about this red; also, perhaps too dark(?):


What to do? What to do.

He likes it!

He really likes it!

Adam and I both agreed that the top picture (the dark neutral gray/taupe) in our previous post was pretty darn good.

The trick now is finding that actual color in a paint swatch.

And if the weather cooperates this weekend, I can get some samples and make some decisions, buy some paint and submit some receipts to the insurance company.

Here's hoping!

Or...

Maybe something in a warm gray instead of taupe-- something to compliment the gray roof better, or will it just look cold all over...? Or green?

More photoshop!




The light gray does seem a bit too cold (obviously we'd choose a cooler off white for the trim, but still...), but I could live with it, I think...On second thought, I don't think I could.

I really like the green, but Adam has been adamant that the body of the house not be green. I photoshopped it in anyway!

And the dark gray/taupe is really nice, too... The green and dark gray seem the most bungalow-y. So many choices in such a time crunch!

Spring colors

Well, it's crunch time. We basically have to get the house painted this month. We also have to fix the hole in our ceiling.

I'm hoping that the weather will stay nice, but I can't count on it. Considering the weather and our budget, we're leaning toward using Valspar Duramax paint. It's supposed to be good down to 35º, it's acrylic so it's ok for brick, and it's got a fairly quick drying time, so they advertise that it's less likely to be affected by wet weather (within a certain time frame, obviously) or morning dew. We've had such great success with other Valspar paints that I'm willing to give this a shot.

Now. As to color...

Last time I talked about this, we had decided to scrap the idea of a brick color, due to the horrendous tuck-pointing on the front of the house.

We then moved on to this color scheme-- Adam slapped this together (with an old photo that doesn't include our new gable vent) and he is MUCH better at Photoshop than I am:

Basically, a nice taupe on the body, buff on the trim, and the red brick for the eaves.

Now, Adam hasn't seen these offenses to Photoshop that I concocted last night, but they are basically colors that we've discussed...

With a red stripe continuing across the front:


And without:

I'm torn. The taupey/beige and green and red are very Craftsman and earthy and I like them very much. But the taupey/beige and buff is so clean and simple, if a bit boring. Flowers in the spring, summer and fall, and holiday decorations in the winter go a long way to helping with that, so...Admittedly, it was hard to get the right color green and the crispness that it should have since I did such a quick, down and dirty job of mocking it up. At any rate...

I just don't know.

Edit-- clearly needs a richer green...more olive, less mint. But hopefully this is enough to get an idea...So torn.

Let's play catch-up

Last you heard from me, I was preparing to fork over a few good holiday recipes and get a little housework done. And then my hard drive crashed. Fatal, nothing spinning, dead as a doornail hard drive crash. So yeah. It's up and running now, and I took lots of pictures in the meantime...

Baking Day
I had such high hopes for delivering these great recipes with step by step pictures. And I started out in the right vein.

Here's the sifted flour and butter/sugar for pecan butter balls-- those melt in your mouth powdered sugar covered cookies:



Here's the butter for 4 recipes worth of almond English toffee:


And the melting sugar and milk for candied pecans:


But then, before I knew it...Oops! All done!

Bagged, canned and ready to go.

But I will still give you one recipe...

Orange-Candied Pecans and Cranberries

1 cup packed brown sugar
3 Tbs condensed milk
1 Tbs butter
1 tsp orange zest
2 cups of pecans
1 cup dried cranberries

Combine brown sugar and condensed milk in saucepan over medium-high heat (see pic above). Bring to 234ºF (softball stage).


Once you've reached 234, turn off heat and stir in butter and orange zest. Add pecans and cranberries until coated. Pour out on wax paper.


Once cooled, break pecan halves apart and bag. I ended up adding a little more than 2 cups of pecans and however many cranberries looked good. You can see that the above is more than one recipe. That's maybe 4? Anyway, easiest thing in the world and magical.

Holiday Business
The kiddo finally got to paint the ornaments I mentioned in the last post:


We hosted Christmas Eve dinner and munched on ham for several days of leftovers. For Christmas, Adam's folks got us a new toaster/convection oven. I'm loving it so far. And my mother got us an espresso machine. It's a much nicer one than I'd have ever bought for myself, and being a former Starbucks employee/Kool-Aid drinker, I've been having a great time fiddling with it and making fancy beverages. It's a wonder that with the DAILY whole milk lattes since Christmas morning I haven't gained 20 pounds. It was lovely.

For New Year we went to friend's house. She has a passel of kids so there was much Rock Band being played and much rum punch being imbibed. By the grownups, of course. Fizzy grape juice for the little ones and ummy yummy Ro-tel dip.

House Business
We did actually get a little done. I got a couple of coats of poly on the countertop trim and made a little progress on the remaining kitchen crown (one little fussy corner is giving me hell). I also started painting that hellish green window in the kitchen, at which point we made some decisions. The kitchen is being finished in alkyd paint. If we lived in a perfect world, I would do the trim throughout the house the same way. But there's circumstances beyond my control. First, I was told by two POs ago that they stripped most of the trim. It now only has one or two layers of paint on it. This was less than ten years ago, and they were living in the house. It's not a high gloss. I'm betting it's latex to begin with. Also, WE live in the house and alkyd is stinky and toxic. And finally, I would have to confine the cats for DAYS depending on the weather and I'm just not interested. We've already given the baseshoe a thin coat of alkyd, so I'll probably want to sand and prime with Zinsser 123 to make sure the latex will stick. Eh. I'm ok with it.

Adam got the garage cleaned and fairly organized, which was a feat of mega proportions and we got the basic box of the gable vent built:



The slats are one more recycling of the garage door boards. And the 2X4s were salvaged from another project. We'll get it permanently set and then trim around it. First I want to paint it. This thing was a monster-- 42" across, and nobody makes a stock size that's horizontal like that.

That's the main stuff. Mostly, we sat on our butts or cleaned or baked. And going back to work is tough now. Really tough.

Best doors ever.

Or, you know...Best Garage Doors This Sad Little Shack Has Ever Seen.

The kiddo and I scraped, sanded and primed the new barn-style garage doors. Actually, I wet scraped and then quickly sanded with my super duper respirator on, just in case the paint was lead-based. Then the kiddo helped me prime. Next weekend? Real paint.

When we were through, I was a little disappointed that they didn't look brand-spanking new. But the more I looked at the doors, the more I decided that this was a good thing; they look like they've always been there, and at least half of them always have. I would much rather save much of the wood and a little money than spend more and waste material on doors that would look a suspiciously good for their location.

They are sturdy and functional and not an eyesore. And really, that's all that matters.

All trimmed out

Another moderately productive weekend, I'd say. And a few lessons learned, of course. I can already see this is going to be a long post, but hey-- at least there's pictures!

I know I mentioned our newly purchased and primed crown for the kitchen-- "crown" is really stretching it; it's a large cove molding. Anyway, Adam and I spent Saturday cutting and installing it.

I don't know if you've ever done crown, but it's a little insane. We knew that the bottom of the molding had to be against the fence of the miter saw if we were going to get consistent corners. But somehow we missed the fact that cove has a top and bottom-- one side's thicker than the other-- and we were trying to flip the pieces over rather than move the to the other side of the saw or just move the saw. We were being lazy and stupid. But Adam finally got in a groove, and things moved right along.

Once we realized that there had to be a better, easier, less stress-inducing way to do this, we ended up using DeWalt's tutorial for cutting crown, and I found this one pretty helpful, too.

To install, we used our handy-dandy Harbor Freight stapler/brad-nailer twofer that we got for $18 with One Project Closer's coupon. It's been a GREAT addition to the tool arsenal; we have a larger Porter-Cable finish nailer, but it's 15ga, it's so heavy and cumbersome and provides such a kick. For these little projects, the 18ga brad nailer is lightweight and easy to handle when you have to hold your arms up and crick your neck to see, and the tiny brads don't tend to split the wood. It is awesome.

Anyway, we got it up there and I spent yesterday caulking and putty-ing the nail holes.

It looks like it has the pox. This (the caulking, not the pox!) brings me the newest addition to the tool box-- a new caulk gun. The one we had was the 99¢ blue one that everyone has in their kitchen tool/junk drawer. In fact, ours either came from Adam's dad or my dad, making it probably a minimum of 15 years old and a maximum of 30. When I used it on the porch, caulk was constantly oozing out and I didn't feel like I had a lot of control over the bead. Ok, ok. I suppose this might have something to do with the fact that I had no clue what I was doing.

But caulk guns are inexpensive even at the top end, and if there's one thing I've learned from this house, it's that the right hands can make cheap tool work; but a cheap tool in the wrong hands is a fucking disaster. So I splashed out on a $5 model that advertises "no-drip technology."

I couldn't see any difference; I stood in Lowe's for a while with a cheapo model and this one in each hand, pulling the triggers and watching them work and...I don't know. But whatever the difference, it's a good one. It absolutely did the trick. My beads were smaller and smoother and the tip stayed pretty mess-free. (I'd like to also point out that caulking is just about the most important part of finish work-- I cannot BELIEVE the difference it makes between looking halfway legitimate and looking like a monkey did the work.)

One bit of a disaster, however, is the space above the broom closet. This closet was a modular afterthought.

As you see, the gaps are too big for the crown to attch to anything on one side, and there's a gaping hole below it on the other side. The side in the first pic is also severely bowed. My solution? Liquid Nail, baby. The bowed side will be more difficult, but I started by gluing a scrap piece of poplar in the other side's gap:
I'll wait for the glue to cure and then glue these two piece of crown together and then to the ceiling and closet. Then I'm sure there will be creative caulking and puttying. We'll see.

Another little kitchen miracle...drum roll...Baseboards!
Not having ragged bottoms and ragged tops has made a world of difference. For this project, we did have to bust out the big finish nailer. These baords were just too much for the little guy.

We also tested some countertop trim profiles on a scrap piece of oak (no decision yet), and I primed the laundry room. Or well, I started to prime the laundry room.

That paneling is a bitch! Or, again, wrong tool wrong hands...I was using a regular roller with a regular nap, and this left nothing in the grooves between "panels." So the whole room turned into one giant "cutting in." I gave up at this point and will buy a thicker napped roller and see where that takes me.

And we changed the battery in my mom's car...OH! One other weird thing. The kiddo was at camp all weekend. But when I woke up this morning, the stuffed teddy bear that she won at the fair last week was laying splayed out in the middle of the bathroom floor. I'm sure the most likely answer is that one of the cats dragged it in there; it's as big as they are, but lightweight. Still, there was no evidence of claws or teeth on it...I like to believe that our little girl ghost who goes from the kitchen to the bathroom at night has taken a shine to it :-)

I need help

No really.

I didn't take any pictures of the problem, so I will describe for you, as best I can, the nature of this beast.

Umm...Some tape peeled the paint off my trim.

I think that sums it up pretty well.

What's happened is, during the course of taping off our kitchen to work on drywall, floor, etc, the masking tape-- and even blue painters' tape-- has peeled bits of paint off of the doorway trim. I blame part of this on a certain someone's reckless ripping off of the tape. But mostly, I think this might mean that some PO painted latex over oil without proper prep. Or that the oil is so old that its doing its whole crumble and FAIL routine.

It's not terrible, and it's only on a few pieces, but I'm trying to decide how best to alleviate this crap. I want to paint this trim soon. I will be using a low-VOC alkyd. It seems to last much longer than latex; I know that latex has come a long way, but I was sitting in my mother's house the other day when I realized that we painted her trim almost 20 years ago. A good scrub with a magic eraser, and it'll be like new. That shit's like a candy shell.

Anyway, I cannot take the trim off of the walls for a variety of reasons, namely due to the fact that the house was drywalled around the trim. I fear I would be opening the most giganticest can of worms ever.

I also considered priming with a serious business primer and succumbing to latex, but we've already painted the yet to be installed base shoe with oil.

So, I'm not sure how to proceed here. The trim is a variety of shades of white throughout the house-- so I think some is oil and some is latex (and the bathroom's is, whatever the base, FLAT FINISH. grrrr. That irritates me so much. It looks sooooo dirty. It IS so dirty). Considering the age of the house, and the many colors that we have see on the trim, I know that whatever's under the possibly-latex layer is oil.

My questions are these: If I prime with something like Kilz2 and paint with oil, am I, somewhere down the line, going to see a problem wherein the maybe-latex layer and surrounding oil/primer lose adhesion? Or will the oil, with its hard candy shell, be ok once it's cured?

Also, how should I handle the pieces with peeling paint-- should I use a stripper (heh.) to get the top layer or two off? Since we're not taking these pieces off the wall, they'll have to be stripped in situ, so I'd probably want to use something like a citrus or soy based remover. I'd prefer to sand as little as possible, due to the lead content.

Should I just wet scrape and prime-- then paint? I'm using a semi-gloss finish, so I don't want too much bumpiness...Scrape, "fill," sand, prime, paint?

Ugh.

I guess I'm leaning toward first trying to scrape. If that's bad, then chemically (or citrus-ally or soy-ally) stripping the face of the trim, then doing some serious priming and painting; and then simply priming and painting the un-peeled trim.

Suggestions?

And then there's the projects we started...

But we were foiled.

I wanted to take care of this over the weekend:

Ok, yeah, that's how we iron around here. Anyway, that's an old door into the kitchen. It's located behind the stove and cabinets along that wall. Judging by this:


we think perhaps the ghost door once led to a butler's pantry or thereabouts. The doorway on the left of the photo still goes to the kitchen; we wondered if that crazy ceiling beam once belonged to a wall separating the pantry form the entryway for the backdoor. Who knows.

That's beside the point, though. We reframed it in when we sheetrocked the kitchen-- a little more solidly than our POs had done before. So now we have to deal with this side. Since we don't want to deal with sheetrocking this entire room yet, we're just going to put the trim back up, as it was when we moved in, and put the piece of paneling back over the hole, again, as it was when we moved in.

Problem now is that we framed it in so that the door jambs aren't going to just slide in. It's going to take some sawing and shimming and rigging. But that's ok. I still sort of like the idea of a ghost door there. It's a nice nod whatever originally went on in that space.

Anywho, we discovered that the panel was too warped to work with right now. It's going to sit like this for the week until it's flat enough to deal with.


And then, I get to paint. Look what I found on the $5 mistint shelf at Lowe's!
If it suxks, I'm only out five dollars and little labor. Can't go wrong!

Settled

We're painting the porch columns brick red and leaving the trim white. If it looks too stark, we'll begin considering trim colors. No sense in making more work or worry than required. However, any suggestions are always appreciated-- something may revolutionize the whole process for us unexpectedly!

Paint obsessions

Adam hasn't seen these yet, so this may all be a moot point...I guess my questions here are this. Does the cream look funny with the grey roof? And if I painted the trim cream, could I leave the rest of the house white, or would it clash too much or look super unfinished? There are also beams running across the porch ceiling that could be painted cream, and the gable vent could be both cream and red. I have seen white clapboard houses with red brick porches, so it might actually work. I sort of like the idea of the porch as a facade... I'm just worried about the cream fitting into the equation. I'm mostly just not sure I'm ready to take the leap of painting the whole house a color.

These things stress me out.

Painting possibilities

So my epiphany has turned into another epiphany entirely-- I had mocked up the house with its usual red trim along the eaves, adding red porch columns and white architectural detail. I knew the red was too bright, but it looked really whorish-- just vulgar. I had to avert my innocent eyes.

And then I tried it with the red eaves, warm grey porch columns and white detail, and I thought it was a little boring, but an improvement and, frankly, very grown up looking. I was very happy.

I got home and Adam wasn't opposed to the grey, but was still holding out for a good red color.

Now, I could have simply browbeaten him into agreeing with me. In fact, when I told him I wanted to show him some colors, he said, "Is this something I have to like, or should I tell you for real?" I was mildly offended, but told him to tell me for real, and he did. So I went and tried again-- with a new picture of the house that included our new roof, and not one that I photoshopped in--

(House as it is now)

and found a much more brick red color. And what d'ya know?! Deja vu all over again. I really think I like it.


Stephanie from Bungalow Insanity suggested this (painting the porch columns and horizontal trim, preferably red) a long time ago, but I've only just now gotten around to mocking it up. And, as usual, I am once again ever so grateful for an awesome suggestion through the blogosphere. Other thoughts, guys?

Now the real question is finding the right red-- one that isn't too brown or pink or purple. I did have a plan at one time. There's a house on the market, a few blocks down, that appears to be a typical red brick bungalow...that is, until you're snooping around sale houses and realize that the mortar and brick are the same color. I was planning on taking some color swatches down there and matching them to that house-- it's just such a great brick color match! And it's empty, right, so who would care? Well, the neighbors are friends of ours and they told us a few days ago that the owners moved into the house after it didn't sell to cut back on costs.

Would it be weird if I knocked on their door and asked if I could stand outside for a while with some paint chips?

A housepaint epiphany

I think I may have a plan for my exterior color scheme. But I haven't shown it to Adam yet, so...Shhh! I'm not showing it to you yet because I don't want to completely jinx it.

At any rate, I thought this would be a good opportunity to share with you another bargain that I found. You may know that I didn't think very highly of my Sherwin Williams interior Classic99 paint experience. This, however, is their low-end line and we've since used their low-VOC alkyd paint for interior trim and have been pretty happy with it-- it's gloopy, but that's the way it goes with alkyd; I may try an additive with the next gallon.

ANYWAY! During my epiphany, I went onto SW's virtual painter application to see if I could find a color similar to my Photoshop choice. That's where I discovered 2 things. First of all, SW lists the RGB values of each of its colors. This isn't going to change the fact that every color looks different in huge quantities, and never looks like it does on a monitor. But, that does at least help make the color slightly more accurate in relation to the things around it when photoshopping said color into a pic. Yes, I know there's a lot of problems with that, but I liked having hte tool for some comparison.

The second thing I saw was that if you use the color visualizer and click to print the color info, you get a 15% off coupon for your next purchase. This is great, because we definitely need more trim paint, and I'm willing to give the higher quality lines a shot on the exterior if I don't find a color I like better elsewhere.

So anyway, mum on that whole epiphany thing, but I thought I'd pass on the savings at least...

It's your fault!

I blame it on all of you out there getting new kitchen cabinets. I've been obsessing over them. When I realized that we aren't in a position to buy new doors right this minute, I thought maybe some sanding and a clear coat of poly would tide me over for a couple of years. So I sanded the back of one door to see. And I really liked it-- or, at least, it was an improvement in my humble opinion:



The top one was partially sanded and given a coat of clear water-based poly. It highlights all the variations in the wood. But then I tried to sand the front of the door. Unfortunately, it's a bit more complicated. Lots of beveling and curved surfaces. It was just going to take too long. Not to mention, the doors are in much worse shape than I remember. I ended up cleaning them all with some 409, taking off the old hinges, and hammering lose stiles back into place. We're going to put these back for now-- just to hide the clutter-- and price building them ourselves. Then we can decide if the money saved is worth doing it ourselves. I may get those custom doors I wanted after all...

I don't think I'd have been able to stand it if that's all I got done this weekend. Luckily, I managed to clean the front porch and then use one of those Lowe's coupons to get some Adirondack chairs.


And the most time consuming project was that baker's rack I mentioned the other day. I picked it up from my mom's and it was in worse shape than I expected.




A couple hours with a wire brush, some steel wool and a spray of water, plus a good coat of primer did the trick, though.



The final product, after a coat of satin wine red--

Ta da!



I like it. We may move it around. At least I got something done! Now I can feel accomplished.