Sunday, May 25, 2014

Falling in love all over again

I chose one bedroom and the hallway to do first, sort of as a test to make sure the floors weren't going to look horrible with a coat of SealCoat.

Nope. They reminded me why I love shellac, why I love antique heart pine, why I love that house, and why I loved doing this work way back when.



We burned out trying to live in the house and finish the remodel at the same time. And the new house is great. But a lot of it is not our style and we still have boxes and clutter and trash all over the place. The bungalow is cozy and comfortable and warm.

Five more rooms to go and a couple coats of poly. I really do hope the bungalow's next family is able to enjoy it.

Saturday, May 24, 2014

Floors all over again...

Well, not ALL over again.

It's been almost 6 1/2 years since we sanded them down to bare wood and refinished them completely.

To rehash a picture from the previous post, you can see where furniture was and wasn't:


And there are going to be areas where things like the feet of the bed wore away the top coat.


I'm going to do one bedroom and the hallway as a test case for adding a coat of SealCoat and more poly since they are not "public" areas of the house and the bedroom will have plenty of furniture, I'm guessing.

Today I swept, vacuumed, and mopped with a mild vinegar solution.

You can already see that when wet, the difference is not so high contrast (obviously this is a bit blotchy with uneven drying, but you get my drift).



There are some trouble spots where grain is raised and a bit of dirt has settled. I'm going to try sanding those areas a bit more than just a scuff.


I'll let this dry overnight and get back to it in the morning. I'm feeling better about it over all.

Now if you'll excuse me, I have a chicken to put on the grill...

Thursday, May 22, 2014

The Saga of Shellac

We were so hell bent on shellac for the floors. And they really were gorgeous, were they not?


Five years of 5 big dogs and a bunch of clumsy people has taken its toll on them. Nothing horrible, just wear and tear. 

(Can you guess where the bed was?)


As you can see, there's still all that rich heart, but the luster is gone. So since we've worn some of the poly down to shellac, we decided we'd do best to put down a coat of dewaxed SealCoat as a bonding agent (remember, most shellac has wax in it, and poly and wax do not get along). However now, no one carries SealCoat anymore. Like no one. It has to be ordered online. And the online reviews all complain about this, so it's not an Arkansas problem. Adam's response was, "So what the hell are people supposed to do?"

Not do the ridiculous shit we did in the first place.

Regardless, I ordered 6 quarts of it on Amazon. It was supposed to arrive today, but was damaged in shipping, so we'll see when it gets here.

And then I'm thinking three (?) coats of water-based poly. Maybe Varathane's heavy traffic version.

If only we could have just done this like everyone else...

The kitchen I'll never have

All these many months that I've been promising more work on the house... and now that we're under a deadline it's getting done. I'm sad that I won't get to personally enjoy some of these endeavors, but I'm happy that someone will. Or maybe they won't. Who knows.

Today, I worked on moving things and working on the kitchen.

The counter trim was never caulked. You can see the shims in place:



I vacuumed out all the crumbs and used black latex DAP. It was a wide enough and deep enough gap that I ran the caulk gun over it twice. It might stand to use a third run, but not today.



And that under-cabinet lighting we did a few years back? It lasted approximately a few days. The next inhabitants will enjoy some decent under-cabinet illumination. These are small florescent, battery powered strips. No need for wiring.



There is a third strip on the right side, but I didn't have enough batteries for it today.

We are also placing an order for unfinished oak, shaker style cabinet doors. I think we decided to go with refacedepot.com. I've seen good reviews and they are in Dallas, so the shipping shouldn't take too long. We also looked at ordering from Cabinet Door Depot, as our old favorites 10K Kitchen Remodel did. Both companies are about the same price for basically the same thing. All said, they will run about $550, plus we will spend a couple of days coating them in water-based poly to match what's on the counter trim. I'll also sand and refinish the drawer fronts since they're pretty basic. These are what we're ordering, but in red oak (maple pictured). I think they'll parallel the the backsplash nicely:


And speaking of backsplashes... The right side panels are just primed. I'm going to put the bronze and copper coats on and fit them in. I'm on the fence over the left side, and if I do put it there, should it go to the end of the upper cabinets, or the counter...

With:



Without:



Thoughts?

There's more with the rest of the house, but I'll save it for another post...